The Odm Universal Door Frame Metal Detector for Prison is the perfect tool for any prison that wants to keep their inmates safe from metal weapons and other contraband. The detector is designed to be mounted onto the frame of any door, and it uses advanced electronic technology to detect metal objects up to three inches in diameter or depth.
The Odm Universal Door Frame Metal Detector for Prison is also ideal for use in schools, hospitals, courthouses, airports, and other public buildings where security is a concern. The detector can be used to prevent weapons from being smuggled into these places of business, but it will also find any other type of contraband like drugs or explosives that may be hidden on people entering through doors.
The arched metal detector is designed to provide search and detection of any metal objects,
forbidden to carry at the entrance to the building for security purposes.
The arched metal detector must comply with the following requirements:
• Simultaneous detection and display of at least two objects on vertical panels
• Vertical localization accuracy of at least 10cm
• At least 33 detection and indication zones (at least 3 vertically, at least 11 horizontally)
• At least 20 standard programs for various working conditions
• At least 200 sensitivity levels
• Availability of at least light and sound indication
• The detector must exclude mutual masking of objects with opposite magnetic properties.
• The metal detector must provide a permanent indication of the operating status on the display
• Availability of software anti-interference filters
• Availability of non-volatile memory for saving settings • Existence of a test mode of self-diagnostics
• At least two-level access code to change settings or operation mode • At least the ability to synchronize multiple detectors for simultaneous operation
• At least joint installation with detectors from other manufacturers
• The metal detector should at least be able to connect to a 220V power supply, both from the top and bottom of the arch, as well as have panels resistant to mechanical damage with impact-resistant end inserts
• The passage of people must be regulated by illuminated panels with the symbols “STOP” and “GO” located on the side of the entrance on each panel.
• The detector display should show information about the number of people who passed through the detector, the number alarms, the total percentage of alarms.
• The detector's control box must be locked with a key
. • Net weight no more than 68 kg • External dimensions no more than 0.9*2.2*0.6m Passage size not less than 0.75*2*0.6m Operating conditions: • Operating temperature range from -20С to +70С • Humidity: up to 95% without direct condensation
Products News Contact Us About Us Service & Support Industries Solutions