If you're looking to install a new metal detector, you may be wondering what the best detection zone is for your airport terminal.
TMWD 60 is the ideal metal detector for airports because of its ability to detect metal objects in a wide range of sizes and types, including bullets and knives. It can detect all kinds of metal objects with a single sweep of the wand.
This means that there's no need for multiple sweeps or checking each item on the conveyor belt—you can just focus on detecting any suspicious items as they come through. It's also easy to set up and use: just connect it to your control unit (which comes with everything you need), turn it on, and go!
The TMWD 60 comes with a control unit that lets you know when there are metal objects in the detection zone by beeping or vibrating, so there's no need to worry about missing something important while driving around aimlessly looking at lights flashing on your screen.
To ensure the good working condition, WTMD should be checked and adjusted regularly.
Maintenance job must be done by qualified people.
Cut the electricity, in case of checking hardware.
Daily maintenance work:
n The device should be installed in the ventilation, dust clear, dry environment, avoid high temperature, high humidity and direct sunlight.
n Clean the dust inside device.
n Tighten the loosen components or wiring plug, if any.
n If any parts damaged, please find out the reason and solve the trouble first, and then replace it. After replacement you need to adjust sensitivity again.
n Don’t leave other object inside WTMD. This may course electricity accident.
3.1 Maintenance attentions
n Don’t leave other object or water inside WTMD
n Cut the electricity and then check the device. If have to be on power, please know the risk well, and operator should be professional qualified.
n Before repair, prevent electrostatic damage to the precision electronics.
n Before power on, make sure that all cables are connecting right.
Products News Contact Us About Us Service & Support Industries Solutions