Hold baggage inspection X-RAY machine
The hold X-ray baggage scanner is a portable device that can be used in the security check of baggage. The device is mainly used to detect hidden objects such as weapons and drugs. It has an integrated camera which can capture images of baggage before they are scanned by a hand-held X-ray machine. It allows users to scan bags without having to use a hand-held X-ray machine. The scanner consists of two major components: an imaging system and a control unit.The imaging system contains a digital camera and infrared LEDs for capturing images of baggage. It also has a lens system, which allows it to focus on the target object during scanning. The control unit receives information from the imaging system, processes it and transmits it to the X-ray machine.
High tech X-RAY inspection system
1 General requirements
Tunnel dimension
Width1000 mm Minimum, 1100
mm Maximum
Height1000 mm Minimum,
1100 mm Maximum
Mechanical construction
Steel construction with steel
panels, mounted on roller
castors
Conveyor height Approx. 350 mm, Adjustable
Conveyor speed Approx. 0.2 m/s, Adjustable
Conveyor load capacity ≥ 200 Kg, Distributed over the
whole conveyor belt
Conveyor belttype
Lower conveyor belt having
endless bonded with no metallic
joints
Flow of conveyor belt Bidirectional (Forward and
Reverse)
Resolution, wire delectability Minimum 38 AWG, or better
Penetration, steel 32 mm or better
X – ray dose per inspection ≤ 2.0 µSV
Film safety Guaranteed up to ISO 1600
Power supply ( Mains city
supply)
Single Phase 220VAC, 50 Hz ±
10%
Power consumption 1.0 KVA ± 10%
Baggage slider
Approx. 1m long for Entrance
and 1.5m long for Exit
separately
Rodent protection Fully rodent protected
Radiation Leakage
As per applicable Law &
Regulation with respect to XRay
emiting devices
Duty cycle 100 %Continuous operation, No
V-9
warm up procedure is required
Operating temperature 0 °c to + 40 ° c
Humidity 10 % - 90% , non condensing
Application Domestic/International Airports
2. X- Ray Generator System
2.1 X-ray generator Maintenance free
2.2 Anode voltage
Operating at 160 KV (-5%,
+10%)
2.3 Beam divergence Minimum 60 °
2.4 Beam direction Diagonal From Top to Bottom
2.5 Cooling/Housing Hermetically sealed oil bath in a
single tank
3. Image Generating &
Processing System
X – ray convertor L - shaped detector array
Number of x-ray detector Minimum 2300 photo diodes or
better
Grey Scale 4096 or better
Image presentation Color and Black/White
Image Display
The normal images shall be
displayed as follows:-
§ Organic : Orange color
§ Inorganic/metallic : Blue
color
§ Overlapping between
organic and inorganic :
Green color
Image Resolution 1280 X 1024/24 bits or better
Image Recall 8 preceding images or better
Image Zoom Continuous zoom in /out with
minimum 32 times enlargement
4.0 Computer Specification:
CPU Industrial Grade Type with, ≥
2.8 GHz processor
Hard drive ≥ 250 GB or better
Memory ≥ 2 GB RAM
Optical drive CD/DVD RW/USB
USB drive 2 Minimum
Monitor
≥19” Color LCD/LED
Monitors,Qty – 2,
Resolution: Minimum 1280 X
1024 Pixels
V-10
or better
5. Advanced Features
Shall have the following
additional features
§ Control Desk with
Locking Facility
§ User/Operator Log in
ID Display
§ Scanned Baggage
Counter Display
§ Date and Time Display
§ Operating Mode Display
§ In addition to above
features, there shall be
an External LCD/LED
Display for X- Ray
Hours, Total Working
Hours.
6. Advanced Control Panel
Shall have at least following
switches, keys,
buttons and indicators
i. Power on/off key
switch
ii. System on and X –
ray on indicators
iii. Emergency stop
buttons (@ Key
board and convenient
sides of the tunnel)
iv. Conveyor belt
control keys
V-11
v. Image review and
resume keys
vi. Smart Image
Processing Keys :
Shall include at least
the following keys
§ Organic Only,
§ Organic
Stripping,
§ Negative,
§ Super
enhancement/c
rystal clear,
§ Variable
Absorption
Image,
§ Black/White
7. Smart Functions
Shall have at least the
following built in smart
features/options
§ Automatic
Detection
Function key
(shall highlight
the suspected
areas with
different colored
frame at least for
Narcotics,
Explosive and
High Density
V-12
Materials )
§ HI-Spot (shall
auto detect,
enhance and
illuminate the
dark image areas
due high
absorption)
8. User Levels/Access
Shall have at least following
user levels and access
§ Operator
§ Supervisor and
§ Service Level User
Access
9. Smart Diagnostic/Test
system
Shall have built in features to
test or diagnosis
the following essential units
for quickest maintenance:
§ Generator,
§ Conveyor Belt,
§ Detector Line,
§ Photo sensor (both at
entrance as well as exit
sides of the tunnel )
§ Emergency Light/Button
10. Threat Image Projection
(TIP)
Shall have built in TIP system to
project the images of fictional
threats on random basis over the
realtime images of thescanned
objects/baggages
V-13
11. Operator Training System
(OTS)
Shall have built in OTS system
with full features to facilitate on
the job training to the traineeoperators
12. Image Management System
Shall have both options of
manual and auto archive for the
images of the scanned baggage
items, at least 99,000 image files
13. Standard Combined Test
Piece (CTP)
The CTP shall contain at least
organic and inorganic samples,
penetration tests of different
metallic items with increasing
thickness,
vertical/horizontal/circular
gratings, and thin wires from 26
SWG to 42 SWG or better.
14. Networking
Shall have the networking
provision for remote
monitoring and image
management
15. Safety and International
Standard Certification
§ Complies with
FAA/ICAO X-ray
protection, radiation and
health regulation
standard
§ Complies with ISO 9001
§ Complies withISO
14001
§ Complies with OHSAS
V-14
18001
16. Power Backup System
Shall supply On line UPS
(operating voltage range: 110 -
240 V AC, 50Hz, ± 10 %, with
LCD/LED Display) complying
minimum 60 minutes back up
with system compatible and
requiredexternal battery bank
Note:
Standard battery rack for the
proposed batteries shall be
furnished along with the power
backup system
17. Hardware and Accessories
To power on and operate, all the
concerned hardware and
accessories including
§ Standard Combined
Test Piece (CTP) as per
specifications
§ Standard Calibration
Kits as per system
requirement
§ Brackets/Clamps/ Kits
§ Power cable and
connectors
§ Standard Maintenance
Tool Kit Set
V-15
§ User manuals (Hard and
Soft Copy) and
§ Cabinet for the monitor
§ System backup software
Shall be furnished.
Products News Contact Us About Us Service & Support Industries Solutions